• Load capacities from 40 to 4,400 lbs.
• Diameters of 1-5/8", 2", 2-1/2", 2-9/16", 3" 4", 5", 6", 8" & 10"
• Plain, roller and precision ball bearings
• Temperature range -4°F to 146°F
• Durometer 80° to 85° Shore D
• Pre-treated for maximum toughness and durability
• Minimum lubrication required
• Crowned tread for ease of movement
• Virtually non-marking - cause little floor damage
• Resistant to oils, fats, alkalis, soaps and detergents
• Ideal for steam cleaning and wash-down applications (including food processing)

• Load capacities from 400 to 1,000 lbs.
• Diameters of 4", 5", 6" & 8"
• Plain and roller bearings - also available with Delrin® bearings
• Economical alternative to nylon wheels
• Designed for use on good floor surfaces at room temperatures
• Resistant to most chemicals and acids
• Non-marking, non-chipping, and steam-cleanable

• Load capacities from 375 to 1,400 lbs.
• Diameters of 3", 4", 5", 6" & 8"
• Plain and roller bearings
• Temperature range -50°F to 260°F
• Durometer 90° Shore D; 02 Rockwell E
• Extremely hard and will support high-static loadings for long periods
• Low rolling resistance, hard wearing, shock resistant, and easy on floor surfaces
• High resistance to chemical attack

• Load capacities from 150 to 195 lbs.
• Diameters of 4" & 5"
• Plain and roller bearings
• Polypropylene center
• Temperature range 14°F to 104°F
• Durometer 80° to 85° Shore A
• Soft, resilient with an attractive appearance
• Rustproof
• Quiet running
• Helps protect floors

RL Series Gray Cushion Rubber Wheels

• Load capacities from 30 to 120 lbs.

• Diameters of 1-5/8", 2", 2-1/2", 3", 4" & 5"

• Plain bearings

• Temperature range 14°F to 104°F

• Durometer 83° to 87° Shore A

• Soft, resilient cushion rubber tires on molded-plastic centers

• Attractive appearance

• Quiet running

• Hygeniec

• Helps protects floors

GR Series Green Rubber Wheels

• Load capacities from 400 to 1,000 lbs.

• Diameters of 4", 5", 6", 6-1/4", 8" & 10"

• Roller or precision maintenance-free ball bearings (lubricated for wheel lifetime)

• Thick, abrasion-resistant tire on nylon or aluminum center

• Temperature range -40°F to 158°F (INTM:212?F)

• Durometer 60° ± 3 Shore N; 70° ± 3 Shore A

• Ideal for towing speeds up to 8mph

• Repels metal shavings and other floor debris

• Non-marking, quiet running

• Reduces noise

• Higher load capacities than standard rubber wheels

• Load capacities from 200 to 550 lbs.

• Diameters of 4", 5", 6" & 8"

• Roller bearings

• Rubber mold-on tires with spoked cast-iron centers

• Durometer 70° to 80° Shore A

• Economical alternative to RU Series wheels for lower load capacities

• Load capacities from 90 to 3,740 lbs.

• Diameters of 2", 2-1/2", 3", 4", 5", 6", 8", 10", 12", 14" & 16"

• Plain, roller, taper roller, or precision ball bearings

• Rubber tires molded to cast-iron center to provide a tough, durable bond

• Temperature range -58°F to 167°F

• Durometer 83° to 87° Shore A

• Combines high load capacities with silent running and floor-preserving qualities

• Designed to withstand rough service conditions

• Available with anti-static, electrically-conductive, or oil-resistant rubber

• Load capacities from 175 to 14,740 lbs.

• Diameters of 2", 2-1/2, 3, 4", 5", 6", 8", 10", 12" & 16"

• Plain, roller, taper roller, and precision ball bearings

• "Revvothane" (Vulkollan®) tan polyurethane tires on cast-iron centers

• Temperature range -22°F to 176°F

• Durometer 92° to 97° Shore A

• Features narrow footprint wheels for ergonomic push-pull results

• High tear strength, exceptional abrasion resistance, and up to ten times the service life of rubber-tired wheels operating under similar conditions

• Up to three times the load capacities of comparable rubber wheels, enabling the use of smaller diameter wheels when required

• Provides specific boundary dimensions into which bearings, bores or keyways can be incorporated as required

• Load capacities from 175 to 10,340 lbs.

• Diameters of 3, 4", 5", 6", 8", 10", 12" & 16"

• Plain, roller, taper roller, and precision ball bearings

• "Revvothane" (Vulkollan®) tan polyurethane tires on cast-iron centers

• Temperature range -22°F to 176°F

• Durometer 92° to 97° Shore A

• Load capacities from 175 to 5,000 lbs.

• Diameters of 2", 2-1/2", 3, 4", 5", 6", 8" & 10"

• Plain, roller, and precision ball bearings

• Handles the most extreme temperature ranges (depending on bearing choice) that would destroy plastic or rubber wheels

• Provides strength and shock resistance with long service life and economy for use where rough service conditions prevail

• Crowned tread to provide low tractive resistance; ideal where ease of movement is required

• Clear resin shellac painted center 

• Grooved cast iron - ideal for use on inverted angle iron rail

• Load capacities from 450 to 2,200 lbs.

• Diameters of 3, 4", 5", 6" & 8"

• Roller and precision ball bearings

• Handles the most extreme temperature ranges (depending on bearing choice) that would destroy plastic or rubber wheels

• Provides strength and shock resistance with long service life and economy for use where rough service conditions prevail

• Crowned tread to provide low tractive resistance; ideal where ease of movement is required

• Clear resin shellac painted center

• Single-flanged cast iron - ideal for use on rails

• Load capacities from 1,670 to 2,200 lbs.

• Diameters of 4"& 6"

• Roller, and precision ball bearings

• Handles the most extreme temperature ranges (depending on bearing choice) that would destroy plastic or rubber wheels

• Provides strength and shock resistance with long service life and economy for use where rough service conditions prevail

• Crowned tread to provide low tractive resistance; ideal where ease of movement is required

• Clear resin shellac painted center

• Load capacities from 300 to 11,175 lbs.

• Diameters of 2", 6" & 8"

• Plain, taper roller, and precision ball bearings

• Handles the most extreme temperature ranges (depending on bearing choice) that would destroy plastic or rubber wheels

• Provides strength and shock resistance with long service life and economy for use where rough service conditions prevail

• Machined from solid mild steel blanks for the toughest applications

• Clear resin shellac painted center

• Load capacities from 590 to 1,450 lbs.

• Diameters of 4", 5", 6" & 8"

• Roller bearings - available with sealed precision ball bearings

• Red polyurethane tire on silver painted cast-iron center

• Durometer 90° to 95° Shore A

• An economical alternative with many of the same benefits as Vulkollan®-Polyurethane (Revvothane) wheels

• Pallet truck type rollers sharing the same characteristics as Revvo NY Series nylon wheels

• Load capacity of 900 lbs.

• Diameter of 3-3/8"

• Available with precision ball bearings or without bearings and seals

• Nylon roller on cast-iron center

• Temperature range -4°F to 176°F

• Durometer 80° to 85° Shore D

• Pallet truck type rollers sharing the same characteristics as Revvo PT Series polyurethane wheels

• Load capacities from 1,320 to 1,760 lbs.

• Diameter of 3-3/8"

• Available with precision ball bearings or without bearings and seals

• "Revvothane" (Vulkollan®) tan polyurethane rollers on cast-iron center

• Temperature range -22°F to 176°F

• Durometer 92° to 97° Shore A